IEC08000174 V1 EN
Figure 112: SMT: GOOSE marshalling with SMT
GOOSE receive function blocks extract process information, received by the data set,
into single attribute information that can be used within the application configuration.
Crosses in the SMT matrix connect received values to the respective function block
signal in SMT, see
Figure 113
The corresponding quality attribute is automatically connected by
SMT. This quality attribute is available in ACT, through the outputs
of the available GOOSE function blocks.
Section 14 1MRK 505 291-UEN A
Station communication
290
Application manual
To Next Page
Loading...
