permanently issue a logical one to the CHNGLCK input. If such a situation would
occur in spite of these precautions, then please contact the local ABB representative
for remedial action.
15.5.3 Setting guidelines
The Change lock function CHNGLCK does not have any parameters available in the
local HMI or PCM600.
15.6 IED identifiers TERMINALID
15.6.1 Identification
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
IED identifiers TERMINALID - -
15.6.2 Application
15.6.2.1 Customer specific settings
The customer specific settings are used to give the IED a unique name and address.
The settings are used by a central control system to communicate with the IED. The
customer specific identifiers are found in the local HMI under Configuration/Power
system/Identifiers/TERMINALID
The settings can also be made from PCM600. For more information about the
available identifiers, see the technical manual.
Use only characters A - Z, a - z and 0 - 9 in station, unit and object
names.
15.7 Product information PRODINF
15.7.1 Identification
Function description
IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Product information PRODINF - -
Section 15 1MRK 505 291-UEN A
Basic IED functions
304
Application manual
To Next Page
Loading...
Need help?
General
