Mode A: Local freeze with spontaneous transmission
Mode B: Local freeze with counter interrogation
Mode C: Freeze and transmit by counter-interrogation
commands
Mode D: Freeze by counter-interrogation command, frozen
values reported
Counter read
Counter freeze without reset
Counter reset
General request counter
Request counter group 1
Request counter group 2
Request counter group 3
Request counter group 4
Parameter loading
(Object-specific parameter, mark with an “X“ if the function is only used in the
standard direction, “R“ if only used in the reverse direction, and “B“ if used in both
directions.)
Threshold value
Smoothing factor
Low limit for transmission of measured values
High limit for transmission of measured values
Parameter activation
(Station-specific parameter, mark with an “X“ if the function is only used in the
standard direction, “R“ if only used in the reverse direction, and “B“ if used in both
directions.)
Act/deact of persistent cyclic or periodic transmission of the
addressed object
Section 3 1MRS757824 C
IEC 60870-5-101/104 protocol implementation
64 Recloser Protection and Control RER615
Point List Manual
To Next Page
Loading...
