ABB Terra 360 CE - Measure the AC Voltage (Terra 180); Measure the AC Voltage (Terra 60)

Procedure
1. Measure the AC voltage between the terminals on the surge protection device
switch:
• L1 , L2 , L3 to N
• L1 to L2
• L1 to L3
• L2 to L3
Use the voltage tester.
Note: The surge protection device switch shows the indications L1 , L2 , L3
and N .
2. Measure L1 , L2 , L3 to ground.
7.5.3 Measure the AC voltage (Terra 180)
Preliminary requirements
•
• Only do this procedure if
a different procedure refers
to this procedure.
• Voltage tester
Procedure
1. Measure the AC voltage between the terminals on the surge protection device
switch:
• L1 , L2 , L3 to N
• L1 to L2
• L1 to L3
• L2 to L3
Use the voltage tester.
Note: The surge protection device switch shows the indications
L1 , L2 , L3
and N .
7.5.4 Measure the AC voltage (Terra 60)
Preliminary requirements
•
• Only do this procedure if
a different procedure refers
to this procedure.
• Voltage tester
Maintenance and cleaning
88 9AKK108467A6398-EN | 002