ABB Terra 360 CE - General Specifications; Parts Included in the Delivery; Transport Specifications; Required Tools for Installation

10.2 General specifications
Parameter Specification
Compliance and safety CE
CHAdeMO 1.2
EN17186
IP rating The type plate shows the specification.
Refer to section 3.1.
IK rating according to IEC 62262: enclo-
sure
IK10
IK rating according to IEC 62262:
touchscreen
IK08
EMC rating Class A
Option for Terra 180: Class B (Residen-
tial) kit
Terra 60: Class B
10.3 Parts included in the delivery
Parameter Specification
EVSE Refer to the type plate. Refer to section
3.1.
Door key Door key for the cabinet
Note: It is possible that more parts are required in the delivery. Refer to
the order.
10.4 Transport specifications
Parameter Specification
Maximum tilt angle during transport 15°
10.5 Required tools for installation
Parameter Specification
Philips screwdriver Size: PH2
Slot screwdriver Size: 4.5 and 2.5 mm
Hex keys Size: 5, 5.5 and 6 mm
Torx screwdriver Size: 15, 20 and 25
Torx angled or bit with ratchet Size: 20
Open spanner Size: M5 (8 mm), M6 (10 mm), M10 (15
mm), M12 (19 mm) and M16 (24 mm)
Technical data
9AKK108467A6398-EN | 002 97