Operation Manual / TPL76-C
8 Disassembly and assembly / 8.7 Installing cartridge group
© Copyright 2018 . All rights reserved. HZTL2485_EN Revision F April 2018
u Remove the lifting gear.
u Remove guide rod (90490).
u Screw in the speed sensor (86505) together with the O-ring (86506)
and plug in the cable connector (86515).
u Reconnect oil and air lines.
Version with compressor wheel cooling system
u Fit the air supply line. (See also chapter entitled Preliminary remarks /
Layout and functionality)
Page 100 / 133
To Next Page
Loading...
