EN - 2
English Translation of the original operating instructions MT/AUT/AUT RAB
EN English Translation of the original operating instructions
© The manufacturer reserves the right, at any time and without prior notice, to make such changes
and amendments to these Operation Instructions which may become necessary due to misprints,
inaccuracies or improvements to the product. Such changes will however be incorporated into
subsequent editions of the Instructions. All trademarks mentioned in the operating instructions are
the property of their respective owners.
All brand names and trademarks that appear in this manual are the property of their respective
owners/manufacturers.
Our latest product documents as well as all contact details for the ABICOR BINZEL national
subsidiaries and partners worldwide can be found on our website at www.binzel-abicor.com
1 Identification EN-3
1.1 CE marking EN-3
1.2 Responsibilities of the User EN-3
2 Product Description EN-3
2.1 Designated Use EN-3
2.2 Use contrary to the
designated use EN-3
2.3 Technical Data EN-4
2.4 Abbreviations EN-6
2.5 Nameplate EN-6
3Safety Instructions EN-7
3.1 Classification EN-7
3.2 Emergency information EN-7
4 Components EN-8
4.1 Transport EN-8
4.2 Storage EN-8
5 Functional Description EN-9
6 Putting into operation EN-9
6.1 Equipping the torch EN-9
6.2 Mounting the wire guide EN-10
6.2.1 Guide spiral liner EN-11
6.2.2 PA liner EN-12
6.3 Mounting the machine side hose
assembly EN-13
6.4 Connecting the cooling system EN-13
6.5 Setting the shielding gas quantity EN-15
6.6 Feed in wire EN-15
7Operation EN-15
7.1 Welding process EN-16
8 Removal from service EN-17
9 Maintenance and cleaning EN-17
9.1 Hose assembly EN-18
9.2 Torch neck EN-18
10 Troubleshooting EN-18
11 Dismounting EN-20
12 Disposal EN-21
12.1 Materials EN-21
12.2 Consumables EN-21
12.3 Packaging EN-21
To Next Page
Loading...
