Contents |
III
Contents
Contact II
Additional technical information 5
Intended use 5
Information in this document 5
Safety and user information 6
General 6
Safety information 6
User information 7
Introduction to the Wallbox eMH3 9
Identifying your wallbox 9
Components included with the wallbox 10
Accessories 11
Installation 13
Installation site requirements 13
Tools and accessories required 14
Preparing the installation site 15
Preparing and fixing the wallbox in place 17
Electrical connection of the wallbox 18
Data cable connections 19
Commissioning the wallbox 21
Connecting the E3BWLAN 23
Installing and connecting the E3BLTE1 25
Axing the label in accordance with
DIN EN 17186-2019 28
Configuring the Wallbox eMH3 29
Stand-alone operation of a Controller wallbox 29
Stand-alone operation of an Extender wallbox 29
Operation and address allocation in a
group installation 29
Configuration via software 31
Data cable connection with the computer 32
Set-up via Charge Point Administration
application 33
Setting up data communication 36
Setting up an OCPP backend 39
Completing the set-up 40
Manual RFID card administration 40
Charging procedure 43
Error resolution and maintenance 46
Identifying errors 46
General operational malfunctions 51
Checking the internal RCCB 52
Taking the Wallbox eMH3 out of operation 53
Maintenance 54
Appendix 55
Technical specifications 55
Standards and guidelines 60
Trademarks 60
Data cable recommendations 60
To Next Page
Loading...
Need help?
General
