Additional technical information |
5
Additional technical information
Additional technical information is required to install your wallbox on one of the separately available mounting poles,
as well as regarding further accessories. It is contained in separate documents.
In addition, the technical data for your wallbox are collated in product-specific data sheets. You can download these
documents from the ABL website using the following link:
https://www.ablmobility.de/en/service/downloads.php
NOTE
Displaying the additional information on a computer, tablet or smartphone
Additional technical information is made available in the Portable Document Format (PDF).
To display PDF files, you need the free Adobe Acrobat Reader or comparable software.
You can find further information about our product range, as well as about separately available accessory compo-
nents on our website at www.ablmobility.de. Please visit:
https://www.ablmobility.de
Intended use
Our Wallbox eMH3 is the ideal solution for group installations in company or hotel carparks. Available with one (Sin-
gle) or two (Twin) charge points, and as stand-alone or Controller-Extender variants. You can also choose between
versions with charging cable or charging socket.
Information in this document
This document explains how to install, configure and commission the Wallbox eMH3: It is recommended that all
working steps described in this document are carried out by a qualified specialist electrical contractor only.
User Specialist electrical
contractor
Installation manual (this document)
Additional technical information
Data sheets
Operating manual
ABL Configuration Software manual
To Next Page
Loading...
Need help?
General
