To Next Page

To Previous Page

| Installation – Affixing the label in accordance with DIN EN 17186-2019

Affixing the label in accordance with DIN EN 17186-2019

In accordance with DIN EN 17186-2019, a graphical indication of the compatibility of vehicles and the charging infra-

structure is mandatory for commercial use. Your charging station therefore comes with a sticker which the operator

must position near the charge point after the installation has been completed.

NOTE

Further information on labelling

 The charging cables optionally available from ABL are marked accordingly by default.

 In the case of purely private use, there is no obligation to affix the sticker to the charging station.

 The sticker can be reordered as an accessory in case of switching from private to commercial use at a later

date.

Wallbox eMH3 with charging socket(s)

 One sticker with black writing on a white background

is supplied for each charge point.

 ABL recommends affixing the sticker in the position

shown on the right-hand side.

Wallbox eMH3 with charging cable(s)

 One sticker with white writing on a black background

is supplied for each charging cable.

 ABL recommends affixing the sticker in the position

shown on the right-hand side.

Other manuals for ABL Wallbox eMH3

Questions and Answers:

Need help?

Do you have a question about the ABL Wallbox eMH3 and is the answer not in the manual?

General