Abus HDCC90002 - Event

79
Event
In the "Event" menu, you define which reactions are to be triggered in the event of an
event (e.g. motion detection).
For some events, it is necessary to define a range, sensitivity and schedule (when
should this event be monitored). Furthermore, you can select the following "linkage
actions" as a reaction to the event.
Under "Trigger Channel", you define which cameras are triggered and recorded in
the event of an event.
Full screen
monitoring
Displays the triggered camera as a full screen on the local
monitor. (Configuration of full screen output under "System" /
"Live View"
)
A
udio warnin
g
Starts a warnin
g
tone on the recorde
r
CMS / Link Station
Push
Sends a push message to the ABUS CMS or ABUS Link
Station App
Send email Sends an e-mail (recipients + SMTP must be set up
beforehand
)
Local->1 Triggers the local alarm output.
Note: Number of alarm outputs varies depending on model
and cameras connected.