94
Live View Parameters
Here you can define which camera may or may not be displayed if no user has
logged in.
To do this, enter the admin password and then select which cameras are to be
displayed in the non-logged-in status.
Reporting per user
For each user, you can define which rights the user has for local and remote access
via the network.
To do this, select the user, click on in the "Permissions" column and enter the
admin password.
Local configuration The permissions in the tab "Local configuration" refer
exclusively to configuration settings that are accessible via
the local user interface (access via local monitor)
Remote
configuration
The permissions in the tab "Remote configuration" refer
exclusively to configuration settings that are accessible via
remote applications (browser, app, CMS software)
Camera
configuration
The authorisations in the "Camera configuration" tab refer
exclusively to cameras. Access and operation of cameras
(live/playback/export) via remote and local are controlled
here.
To Next Page
Loading...
