Abus HDCC90002 - Recording Image (Capture)

83
Recording Image (Capture)
First activate the schedule, click on a trigger and then drag in the weekly calendar
with the left mouse button pressed to define the desired times.
Note: Depending on the system configuration and the number of
cameras, a storage time of up to 10 seconds can be achieved.
Post-alarm
Select the duration for post-alarm storage for event recordings
Stream type
Select the stream source for the recording. With "Stream1&2" both
streams are recorded
Expiry time
(days)
Specify how many days the recordings are to be kept before they
are overwritten
Redundant
(video/image)
Activates the storage for the HDD group "Redundant" (Is only
available if the HDD group mode is activated)
Duration
Permanent storage of snapshots
Event
A snapshot is saved for each type of event (movement or VCA
events).
Movement
An image is only saved when motion is detected
Alarm
An image is only saved in the event of an alarm input
(local/remote).
B | A
An image is saved when motion is detected or when an alarm is
received (local/remote).
B & A
An image is only saved if motion detection and alarm input are
present at the same time
None
There is no recording
Edit Here
y
ou can edit the settin
g
s in list form