Abus Terxon PSTN - Output; Call Allocation

54
Press
to confirm your selection.
Press
to end data entry.
10.6 Output
A reaction type can be allocated to a transistor output using this menu
option. The transistor output switches in one of the following states:
- ACTIVE: Triggering of an input.
- SUCCESS: Transmission and confirmation of an
alarm call.
- FAILED: Unsuccessful transmission of an alarm call.
- OFF: Output not used.
Enter your programming code (default: 1234). The following message
is shown in the display:
READY
Press
. The display shows the following:
OUTPUT-
Press to display the current output type:
ACTIVE
Press the
key to select the other output types.
SUCCESS
Press
to confirm your selection.
Press
to end data entry.
10.7 Call allocation
Voice messages A-D can be allocated individually or to all telephone
numbers.