Abus Terxon PSTN - Page 60

60
Press 1-4 to send the message to the selected telephone number.
Press
to send the message to all telephone numbers.
After the device has recognised the dial tone of the recipient, the
following message can be seen in the display:
RINGING
IMPORTANT
If no dial tone is recognised, the device starts to play the message
automatically after 5 seconds.
If a successful connection is established, the identification message
and corresponding message are played.
PHRASE 0
PHRASE A
If the message is confirmed on the telephone, then the following
message is displayed:
SENT OK
If the message is not confirmed on the telephone, then the following
message is displayed:
NO REPLY
The test report can be cancelled at any time by pressing the key.
Press
to end data entry.