Maintenance
117
Maintenance
System Info
The information menu shows the technical data
for the device and information on the various
settings of the cameras, recording, alarm, network
and HDD.
This can be useful for support queries, for
example.
You can search for "events" according to the
following main types/events/parameters:
All
Alarm
Warning
Operation
Information
Motion detection
Start/stop
Start/Stop Video Tampering
Detection
All
Video Signal Loss
Illegal Login
HDD Full
HDD Error
IP Conflicted
Network Disconnected
Exception Recording
Video input/output signals not
equal
Recording Buffer
This menu is used for device maintenance and
should only be used by experienced users.
Device Info (Serial No., Firmware
Version etc.)
In Log Information (=log file), you can
search for recordings or information
(S.M.A.R.T. hard disk drive status) by
certain criteria, such as alarm,
exception, operation or information.
Import and export settings
Performs a firmware upgrade
Displays the transmission and
reception rate of the recorder
Checks the hard disk drive for errors