Abus TVVR33004 - S.M.A.R.T. Hard Drive Check; Shutdown and Reboot

Maintenance
121
S.M.A.R.T
Click on the "HDD Detect" submenu.
This submenu gives you the option to check your hard
disk drive for errors.
HDD
Selection of the hard disk drive to
be processed
Self-test Status
Shows the status of the current self-
test
Self-test Type
Select the type of self-test
Short Test/Expanded
Test/Conveyance Test
S.M.A.R.T
Click on the icon to start the self-
test
Temperature (°C)
Shows the hard disk drive
temperature
Power On
(days)
Shows the operating days of the
hard disk drive
Self-evaluation
Shows the status of the self-
evaluation
Complete
evaluation
Shows the status of the evaluation
Confirm the settings by clicking on Apply and exit the
menu by clicking on OK.
Checking the hard disk drive status
You can check the status of each hard disk drive in the
"System Maintenance" menu. The S.M.A.R.T (Self-
Monitoring, Analysis and Reporting Technology)
information is stored in the log data.
 Open the log file and search by
information/S.M.A.R.T. Hard disk drive. Setting up the
hard disk drive alarms
 You can specify which alarms will inform you of hard
disk drive errors.
To do this, open "Exception" in the "Settings" menu.
Shutdown
Note
 Select Lock to lock the operating menu.
 Select Shutdown to switch the device off.
 Select Reboot to reboot the system (switch off
and back on).