Configuration
If no email is received, check the settings and cor-
rect them where necessary.
If necessary, check the junk mail settings for your
email client.
Note
You can obtain the access data and settings for
sending SMTP from your email provider. Some
email providers only provide SSL encryption for
sending emails. This recorder has been tested for
SSL compatibility with the following providers:
GMX, Web.de and Gmail.
NAT tab
Parameter Setting
Enable UPnP
Tick the box to enable visibility on an
IP network. When this function is acti-
vated, port forwarding is automatically
entered in the router for all network
ports (provided that UPnP is enabled
in the router).
If UPnP is enabled, the network por
configured by UPnP are transferred to
the ABUS server (provided that ABUS
DDNS is enabled).
Mapping type
For “manual” settings, the network
ports can be manually defined using
the “Edit” button.
For “auto” settings, the recorder
checks for free network ports on the
router and defines the port numbers in
a random pattern.
Confirm the settings by clicking on Apply and exit the
menu by clicking on Back.
More Settings tab
Parameter Setting
Alarm Host IP Network address of the CMS station
Alarm Host port Port for your CMS station
Server port
Port for data communication (default:
8000)
HTTP port Port for the web server (default: 80)
Multicast IP ad-
dress
You can enter the multicast IP here
too in order to minimise traffic. The IP
address must correspond to the one in
the video surveillance software.
RTSP port Enter the RTSP port
(Default: 554).
Note
Server port 8000 and HTTP port 80 are the stand-
ard ports for remote clients and remote internet
browser access.
32
To Next Page
Loading...
