Maintenance
Maintenance
Note
This menu is used for device maintenance and
should only be used by experienced users.
Menu Setting
System Info Device information (Serial No., Firm-
ware Status etc.)
Log Search In Log Information (=log file), you can
search for recordings or information
(S.M.A.R.T. hard disk drive status) by
certain criteria, such as alarm, excep-
tion, operation or information.
Import/Export Import and export settings
Update Performs a firmware upgrade
Default Resets the system
Network Displays the transmission and recep-
tion rate of the recorder
HDD Detect Checks the hard disk drive for errors
System Info
Note
The information menu shows the technical data for
the device and information on the various settings
of the cameras, recording, alarm, network and
HDD.
This can be useful for support queries, for exam-
ple.
Note
In the Wi-Fi tab you can view the devices which
are connected to the Access Point of the recorder
via Wi-Fi, as well as their connection bandwidth.
Log Search
Note
You can search for “events” according to the fol-
lowing main types/events/parameters:
• All
• Alarm
• Warning
• Operation
• Information
Filter1 Filter2
All -
Alarm
• All
• Motion detection
• Start/stop
• Start/Stop Tamper Surveillance
Warning
• All
• Video Signal Loss
• Illegal Login
• HDD Full
• HDD Error
• IP Conflicted
• Network Disconnected
• Exception Recording
• Video input/output signals not
equal
• Recording Buffer
Operation
• All
• Power On
• Local: Unscheduled Shutdown
• Local: Shutdown, Reboot,
Login, Logout
• Local: Change Settings
• Local: Update
• Local: Start Recording
50
To Next Page
Loading...
