Configuration
Settings
Trigger Channel tab
Tick the corresponding box to select which camera chan-
nel is triggered in the event of an alarm.
Arming Time Schedule tab
• Define the time at which the responses selected in
the “Reaction” tab are activated when there is an
alarm.
• Click on “Copy” to apply these settings to other days
of the week or the entire week.
Linkage Action tab
Here you can configure the response of the recorder in
the event of an alarm by ticking the corresponding box.
Parameter Notifications
Full Screen Monitoring
The camera is displayed in
full screen in live view.
Audible Warning The device does not have an
audible warning.
Notify Surveillance Cen-
tre
warning tone.
Send Email An email is sent to a specified
email address. See page31
Trigger Alarm Output
The alarm output is triggered
in the event of an alarm.
PTZ Linking tab
Here you can control specific PTZ presets, patrols or pat-
terns for a taught-in camera.
Parameter Notifications
PTZ Select the camera to be controlled us-
ing a PTZ command in the event of an
alarm.
Call preset Select the preset number.
Start patrol Select the patrol number
Call pattern Select the pattern number
• Confirm the settings by clicking on Apply and exit
the menu by clicking on OK.
34
To Next Page
Loading...
