341
Revision Date Description
1.63 20120417 Change" Time of use (TOU)" Increase in" Acuvim IIW ".
1.64 20120724
Update the method for generating CRC value;
Change the voltage rated value and voltage swell threshold.
1.65 20120913 Change the Weekend Setting in TOU.
2.01 20130621
Add the parameter setting page and BACnet parameter setting
page; Data logging Record mode description; Waveform
recording function; Sealing function; AO function; Voltage
wiring; Harmonic content rate range; Net electric range;
Clear alarm directives; Update the webpage browsing and
parameter settings, and add the SNMP and SNTP function.
2.02 20140214 Add DNP3.0 and BACnet Protocol Introduction.
2.03 20151111
Add the sub-phase energy of Trend recorded; Add the Current
month energy and Prior month energy of TOU; Support mA
transformer; Supports 400Hz signal input; Support 100ms
Refresh Metering Parameter; Support mesh module; Support
seven day energy billing
To Next Page
Loading...
Need help?
General
