82
1. Data log settings
The
Acuvim IIR/IIE/IIW
meter has three sets of historical data logs. Each log can be
independently programmed with individual settings, meaning that each can be
used to monitor dierent parameters. You can program up to 117 parameters
per log. You also have the ability to allocate available system resources among
the three logs, to increase or decrease the size of the individual historical logs.
The total size is no more than 100 sectors that has 64k bytes. The data log 1
setting is shown in Fig 4-8.
Fig 4-8 The data log 1 setting
To Next Page
Loading...
Need help?
General
