3-30 Machine Maintenance Procedures
LCD Bezel Removal 0
Prerequisite:
LCD (Liquid Crystal Display) Module Removal
1. Remove two (2) rubber screw seals (A) from the LCD module (Figure 3-29).
Figure 3-29. LCD Bezel Rubber
2. Remove two (2) screws (B) from the LCD module (Figure 3-30).
Figure 3-30. LCD Bezel Screws
http://mycomp.su - Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook
Ремонт ноутбуков.Запчасти и комплектующие для ноутбука. Схемы,сервис мануалы,инструкции по разборке ноутбука.