2-16 System Utilities
WinFlash Utility 0
Perform the following to use the
WinFlash Utility
:
1. Copy the WinFlash executable ZE7_025W.exe to desktop.
2. Double-click WinFlash executable ZE7_025W.exe to start the flash process.
3. Click
OK
to begin update. A progress screen is shown. (Figure 2-14)
4. System will restart automatically when the Flash finished.
Figure 2-14. InsydeFlash
http://mycomp.su - Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook
Ремонт ноутбуков.Запчасти и комплектующие для ноутбука. Схемы,сервис мануалы,инструкции по разборке ноутбука.
To Next Page
Loading...
