Machine Maintenance Procedures 3-9
Dummy Card Removal 0
1. Push the dummy card (A) in to release it from the spring latch (Figure 3-4).
2. Remove the dummy card (A) (Figure 3-4).
Figure 3-4. Dummy Card
Dummy Card Installation 0
1. Insert the dummy card (A) (Figure 3-4).
2. Push the card until the spring latch locks.
http://mycomp.su - Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook
Ремонт ноутбуков.Запчасти и комплектующие для ноутбука. Схемы,сервис мануалы,инструкции по разборке ноутбука.