System Utilities 2-23
9. At the command prompt, type
VEEPROM
to write any changes in the data to the
EEPROM.
Figure 2-27. VEEPROM Command Prompt
When using any of the write options, restart the system to make the new
DMI data effective.
http://mycomp.su - Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook
Ремонт ноутбуков.Запчасти и комплектующие для ноутбука. Схемы,сервис мануалы,инструкции по разборке ноутбука.
To Next Page
Loading...
