- 2 -
CONTENT
Page#
1. SAFETY INSTRUCTIONS 5
1-1. General Safety Instructions For Operating The Machine 5
1-1-1 Safety instructions for work holding 7
1-2. Maintenance Safety Instruction 8
1-3. Installation Precautions 8
1-3-1 Grounding 9
1-3-2 Environmental conditions 10
1-4. Safety Precaution 10
1-4-1 Before powering on the machine 12
1-4-2 Routine inspections 12
1-4-3 Warm-up 13
1-4-4 Preparations 13
1-4-5 Operation 14
1-4-6 Noise level 14
1-4-7 To interrupt machine 15
1-4-8 Completing a job 15
1-4-9 Safety devices 16
1-4-10 Maintenance operation preparations 16
1-4-11 Maintenance operation 16
1-4-12 Unit operation is begun after maintenance 17
1-5. Warning Signs On The Machine 17
2. SPECIFICATION 20
2-1. Machine Specification 20
2-2. Milling Head Specification 30
2-3. Features & Description of Machines 31
3. UNCRATING & CLEANING 34
4. INSTALLATION 34
4-1. Lifting Machine 35
4-2. Solid Foundation 38
4-3. Leveling Machine 42
4-4. Handles 42
4-5. Connecting Power Supply 42
4-6. Wiring Diagram 44
A. Regular Circuit Diagram for 3VS, 3VSII, 3VK, 3VKH, 5VK 44
B. Regular Circuit Diagram for 6VK 52
C. UL Electric Diagram for 3VS, 3VSII, 3VK, 3VKH, 5VK 60
D. UL Electric Diagram for 6VK 65
To Next Page
Loading...
