26
Change the Date
1. In this example, press CHANGE until the date is "09". Refer to DST on page 23.
2. Press SET.
3. The "Starting Date" of the display changes from flashing to steady and the S mark is
displayed under "SU".
End Date
Change the Year
1. Press SELECT until the T is above the "DST END" mark.
2. The flashing digit indicates "Year".
3. In this example, the "Year" is not being changed. Refer to DST on page 23.
4. Press SET.
5. The flashing changes from "Year" to "Month".
To Next Page
Loading...
