ACT ACTpro 1520 - Create New Database

ACTpro 1500 and 1520 Operating and Installation Manual
Page 30
16.0 Create a new Database
Select “File->New->Create” from ACTWin menu.
Enter an appropriate database name such as “CustomernameAccessDB” and press the
Save button.
Installation Wizard:
Step-1 next
Step-2 Select ACTpro 1500 controller and the number of doors installed or to be
installed. Press next
Step-3 Select TCP/IP and enter the controller IP address; if using a USB cable then
select USB. Press next
Step-4 Finish.
Note:
When first installed ACTWin disables the webserver on
the 1500 controller. To re-enable the Web Server
feature,
 Choose the controller Database->Controller
 Enable the Web Server in the Operation section
 Save (Record->Accept)