Acteon PSPIX - Page 41

ENGLISH
PSPIX² • User manual
41
DESIGNATION RECOMMENDATIONS
METHOD AND PRECAUTIONS
DO
DO NOT
Cleaning the PSPIX
system and removable
parts (IP insertion part
and receptacle)
Remove the removable parts
from the PSPIX system (IP
insertion part and receptacle).
-To clean the PSPIX system and
its removable parts, use a non-
abrasive cloth dipped in:
-cold or tepid water,
-soapy water
-a light detergent
-butyl alcohol,
-ethanol (ethyl alcohol) from
70 – 96 %.
-Use a compressed air system to
clean the black part underneath
the IP insert.
After cleaning, wipe the
PSPIX system with a non-
abrasive cloth dipped in
cold water.
-Never use solvents
or abrasive cleaning
products to clean the
PSPIX system.
-Do not spray the
cleaning solution
directly onto the PSPIX
system.
-Do not place cleaning
solution in the PSPIX
system’s insertion slot.
-Never use a wet cloth
on the black part of the
IP’s insertion part.
https://stomshop.pro