ACTi GNR-3000 - Restore System Data

www.acti.com
GNR-3000 System Administrator’s Manual
142
Restore System Data
Before starting restoring the system, make sure you already have the backup file (.xml).
Please follow the below steps to restore the configuration.
1. Go to Setup page System tab Backup / Restore.
2. In Restore section, click “Browse” to select the backup file, and then click “Restore” to
start restoring the settings.
3. The restoring process requires logging out of the NVR server. After restoring is done, you
may log in using your previous user account properties.
1
2