GNR-3000 System Administrator’s Manual
56
Set up the System
This chapter will guide you through everything you need to know in System Setup procedure
from first time connection with ACTi NVR 3.0 server to general system configuration.
Setup Wizard
Once you connect to ACTi NVR 3.0 for the first time, Setup Wizard will guide you through the
initial setup process. You may click “Previous” or “Next” button located on the lower right at
any time. This will skip the current step so that you may come back to it later. All the settings in
the Setup Wizard are available in the Setup page.
To skip this wizard, click the bubble “Done” on top right corner.
To Next Page
Loading...
