ACTi GNR-3000 - Copy an Existing Schedule to Others

www.acti.com
GNR-3000 System Administrator’s Manual
95
Copy an Existing Schedule to Others
With plenty of devices in your system, it happens that you want to apply the same schedule to
multiple devices. After creating a schedule for one device, you can copy it to other cameras.
1. Go to Setup page Schedule tab, on Device List, select the device you want to copy
schedule settings from.
2. Click the “Copy” button.
3. On popup window, select target devices you want to copy schedule settings to.
4. Click the “Apply” button.
To check the result, go to Schedule tab, click All Devices on Device List.