ACTi GNR-3000 - Add Devices

www.acti.com
GNR-3000 System Administrator’s Manual
60
Add Devices
Cameras or video encoders are the fundamental building blocks of surveillance systems. To
manage cameras from GNR-3000, you have to add camera devices into NVR3 system first.
In this section, we will guide you through how to add or delete devices on the NVR3 system.
To start adding new devices, please follow these steps:
1. On Setup pageHome screen, click “Device”.
2. On Devices page, the Device List is currently empty, and you need to add some video
sources to it. Now click “Add Device”.
Device List