4. At the top of the next window, select the type of connection used by the IS P.
5. If PPPoA or PPPoE was selected in step 4, the default user name and pass-
word are entered in the appropriate text boxes.
If “DHCP” was selected, go to step 5.
6. Click Apply at the bottom of the screen.
7. The Power light flashes rapidly while the R3000 restarts, then glows steadily
green when fully operational. The Internet light will also glow steadily green.
The R3000 is now configured and users can start surfing the Internet.
If an error appears, stating the Web browser was unable to connect to the
Internet, check the configuration settings. Ensure all the information required
by the ISP is entered correctly.
To Next Page
Loading...
Need help?
General
