ActionTec R3000 User Manual

32
R3000 Wireless Router
Services Blocking
Services blocking is used to prevent a device on the R3000’s network from accessing
particular services available on the Internet, such as receiving email or downloading
files from FTP sites. To set up services blocking on a networked device:
1. Click Services Blocking from the menu on the left side of any Advanced
Setup screen. The Services Blocking screen appears.
2. Select the device on which you wish to block services from the Select Device
drop-down list, or enter the device’s IP address in the Enter IP Address
text box.
3. Select a service, or multiple services, to block by clicking in the appropriate
check box below Select service to block.
4. Click Apply to save your changes.
5. Repeat steps 1-4 to block services on another device on the network.
The devices that are blocked from accessing services are listed at the bottom of
the screen.

ActionTec R3000 Specifications

General

Brand	ActionTec
Model	R3000
Category	Wireless Router
Language	English