Website Blocking
Web site blocking is used to prevent all devices on the R3000’s network from
accessing particular web sites on the Internet. To set up web site blocking on the
R3000’s network:
1. Click Website Blocking from the menu on the left side of any Advanced Setup
screen. The Website Blocking screen appears.
2. Enter the web site address of the web site to be blocked in the Website Address
text box.
3. Click Apply to save your changes.
4. Repeat steps 1-3 to block other web sites from being acesssed on the
R3000’s network.
The web sites blocked from being accessed on the R3000’s network are listed at the
bottom of the screen.
To Next Page
Loading...
