ActionTec R3000 User Manual

43
Advanced Setup
4. Set the remote management port. It is set to port 443 by default. If the remote
management port number has been changed, you will need to use the URL
“https://” followed by the R3000’s IP address, a colon (:), then the port number
to which the remote management port was changed.
Example: https://192.170.1.1:234.
5. Select the remote management timeout. If you select one of the time periods
provided in the drop-down list, remote management of the R3000 will stop
after the selected time period, if no actions are detected.
6. Click Apply to save your changes.
Remote Telnet
The Remote Telnet screen allows you to set up the R3000 so that it can be accessed
from a remote (not local) telnet device. To use:
1. Click Remote Telnet from the menu on the left side of any Advanced Setup
screen. The Remote Telnet screen appears.
2. Click in the Enable radio button next to Remote Telnet to activate.
3. Enter a username and password in the appropriate text boxes beneath step 2.

ActionTec R3000 Specifications

General

Brand	ActionTec
Model	R3000
Category	Wireless Router
Language	English