Wireless MAC Authentication
Click MAC Address Control from any Wireless screen to generate the Wireless
MAC Authentication screen. From here, the user can allow or deny access to the
R3000’s wireless network for wireless devices using the devices’ MAC address. A
MAC address is a unique code that identifies every wireless-capable device (print-
ers, computers, tablets, smartphones, etc.).
To set up authentication on the R3000’s wireless network using MAC addresses:
1. Select the wireless network frequency by clicking in the appropriate button.
2. Select a wireless network name from the SSID drop-down list.
3. Turn on MAC authentication by clicking in the Enable button.
To Next Page
Loading...
