Caution! A DMZ host is not protected by the firewall and may be
vulnerable to attack. Designating a DMZ host may also put other
computers in the local network at risk. When designating a DMZ
host, consider the security implications and protect it if necessary.
To designate a local computer as a DMZ host:
1. Click in the “Enable” radio button to activate DMZ hosting.
2. Select a networked device by selecting it from “Select Device” drop-down list,
or enter its IP address in the “Enter IP Address” text box.
3. Click Apply to save your changes.
The DMZ host will be displayed in the “DMZ Hosted Device” table at the bottom
of the screen. Only one device at a time on the Router’s network can be designated
as a DMZ host.
UPnP
Click UPnP from any Firewall screen to generate the “UPnP” screen. UPnP
(Universal Plug and Play) allows all supported devices on the Router’s network to
discover and interface with each other without additional configuration. To enable
UPnP on the Router’s network, click in the “Enable” radio button.
To Next Page
Loading...
Need help?
General
