ActionTec R3000 User Manual

52
R3000 Wireless Router
NAT
Selecting NAT from any Advanced Setup screen generates the NAT screen, which
is used to enable or disable NAT, at the request of your ISP. If your ISP requires
you to disable NAT, click in the Disable radio button, then click Apply. This action
should be undertaken by an experienced network technician only.
UPnP
Selecting UPnP (Universal Plug and Play) from any Advanced Setup screen generates
the UPNP screen, which is used to set up gaming consoles on the R3000’s network. To
activate UPnP, click in the Enable radio button, then click Apply.

ActionTec R3000 Specifications

General

Brand	ActionTec
Model	R3000
Category	Wireless Router
Language	English