2. Enter the new modem IP address and modem subnet mask in the appropriate
text boxes.
3. Click Apply and Reboot. The R3000 reboots with the new settings.
To change the R3000’s DHCP settings:
4. Click Enable to activate the R3000’s DHCP server.
5. Enter the DHCP server’s beginning IP address, ending IP address, and subnet
mask address in the appropriate text boxes.
6. Enter the DHCP server’s lease time period by entering the days, hours, and
minutes in the appropriate text boxes.
7. Set the DNS values by selecting Dynamic or Static (clicking in the appropriate
radio button), then, if needed enter the IP addresses for DNS server 1 and 2.
8. Click Apply to save your changes.
To Next Page
Loading...
