Basic Settings
Click Basic Settings from any Wireless screen to generate the Basic Settings
screen. This screen displays step-by-step instructions to set up a secure wireless
network with the Modem Router.
To configure the basic wireless settings of the Modem Router:
Enable the wireless radio of the Modem Router by clicking in the Enable radio 1.
button to activate it.
If needed, change the name of the Modem Router’s wireless network by enter-2.
ing a new one in the Network Name text box. Otherwise, you can use the one
that is already entered the the text box. You should write this name down, so
that you can refer back to it later, when connecting other wireless devices (such
as smartphones or laptop computers) to the Modem Router’s wireless network.
To Next Page
Loading...
