ActionTec V1000H User Manual

62
Wireless VDSL Modem Router
NAT
Selecting NAT from any Advanced Setup screen generates the NAT screen, which
is used to enable or disable NAT, at the request of your ISP. If your ISP requires
you to disable NAT, click in the Disable radio button, then click Apply. This action
should be undertaken by an experienced network technician only.
UPnP
Selecting UPnP (Universal Plug and Play) from any Advanced Setup screen generates
the UPNP screen, which is used to set up gaming consoles on the Modem Router’s
network. To activate UPnP, click in the Enable radio button, then click Apply.

ActionTec V1000H Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
Antennas quantity	2
RJ-11 ports quantity	1
Ethernet LAN (RJ-45) ports	4
Firewall security	Application-level gateway (ALG), Protocol and generic packet filter
Security algorithms	WEP, WPA, WPA2, WPS
Dimensions (WxDxH)	- mm
Product color	Black

Weight and Dimensions

Weight	- g