EasyManuals Logo

ActionTec V1000H User Manual

ActionTec V1000H
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #50 background imageLoading...
Page #50 background image
47
Chapter 5 Advanced Setup
Enter the new modem IP address and modem subnet mask in the appropriate 2.
text boxes.
Click 3. Apply and Reboot. The Modem Router reboots with the new settings.
To change the Modem Routers DHCP settings:
Click 4. Enable to activate the Modem Router’s DHCP server.
Enter the DHCP servers beginning IP address, ending IP address, and subnet 5.
mask address in the appropriate text boxes.
Enter the DHCP servers lease time period by entering the days, hours, and 6.
minutes in the appropriate text boxes.
Set the DNS values by selecting Dynamic or Static (clicking in the appropriate 7.
radio button), then, if needed enter the IP addresses for DNS server 1 and 2.
Click 8. Apply to save your changes.

Other manuals for ActionTec V1000H

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ActionTec V1000H and is the answer not in the manual?

ActionTec V1000H Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standardWi-Fi 4 (802.11n)
Antennas quantity2
RJ-11 ports quantity1
Ethernet LAN (RJ-45) ports4
Firewall securityApplication-level gateway (ALG), Protocol and generic packet filter
Security algorithmsWEP, WPA, WPA2, WPS
Dimensions (WxDxH)- mm
Product colorBlack
Weight and Dimensions IconWeight and Dimensions
Weight- g

Related product manuals