4
Wireless VDSL Modem Router
Power
The Power LED displays the Modem Router’s current status. If the Power LED
glows steadily green, the Modem Router is receiving power and fully operational.
When the Power LED is rapidly flashing, the Modem Router is initializing. If the
Power LED is glows red when the Power cord is plugged in, the Modem Router
has suffered a critical error and technical support should be contacted. If the
Power LED is flashing red, the Modem Router is performing a firmware update.
DSL
The DSL LED illuminates when the Modem Router is connected to an xDSL line.
If the DSL LED is flashing, the Modem Router is in training for DSL service.
WAN Ethernet
When the WAN Ethernet LED glows steadily, the Modem Router is connected
to an Ethernet WAN. When it flashes, it signifies that data traffic is traveling
across the connection.
Internet
When the Internet LED glows steadily, the Modem Router is connected to the
DSL provider. When it flashes, data traffic is passing across the Modem Router.
LAN Ethernet
The LAN Ethernet LEDs illuminate when the Modem Router is connected to
another device via one of its LAN Ethernet ports. When one of the LAN Ethernet
LEDs flashes, data traffic is passing across the corresponding connection.
HPNA
The HPNA LED illuminates when the Modem Router is connected to another
device via its HPNA port. When it flashes, data traffic is passing across
the connection.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
