ADCMT 7451A User Manual

7451A/7461A/7461P Digital Multimeter Operation Manual
6.7.2 Output Data Format
6-21
FREQ (<10 Hz) (d.dddddE+00) FREQ (<10 Hz) (d.dddddE+00)
(<100 Hz) (dd.ddddE+00) (<100 Hz) (dd.ddddE+00)
(<1000 Hz) (ddd.dddE+00) (<1000 Hz) (ddd.dddE+00)
(<10 kHz) (d.dddddE+03) (<10 kHz) (d.dddddE+03)
(<100 kHz) (dd.ddddE+03) (<100 kHz) (dd.ddddE+03)
(<1000 kHz) (ddd.dddE+03) (<1000 kHz) (ddd.dddE+03)
LP-2W 100 ddd.ddddE+00 LP-2W 300 ddd.dddE+00
1000 dddd.dddE+00 3000 dddd.ddE+00
10 kdd.dddddE+03 30 kdd.ddddE+03
100 kddd.ddddE+03 300 kddd.dddE+03
1000 kdddd.dddE+03 3000 kdddd.ddE+03
10 Mdd.dddddE+06 30 Mdd.ddddE+06
LP-4W 100 ddd.ddddE+00 LP-4W 300 ddd.dddE+00
1000 dddd.dddE+00 3000 dddd.ddE+00
10 kdd.dddddE+03 30 kdd.ddddE+03
100 kddd.ddddE+03 300 kddd.dddE+03
1000 kdddd.dddE+03 3000 kdddd.ddE+03
10 Mdd.dddddE+06 30 Mdd.ddddE+06
DIODE 1 range dddd.dddE-03 DIODE 1 range
dddd.ddE-03
CONT 1 range dddd.dddE+00
TEMP 1 range dddd.dddE+00 CONT 1 range dddd.ddE+00
DCV-Bch HI-COM measurement dd.dddddE+00 DCV-Bch HI-COM measurement dd.ddddE+00
DCV-Bch HI-LO measurement dd.dddddE+00 DCV-Bch HI-LO measurement dd.ddddE+00
DCV-Bch RATIO measurement d.ddddddEdd DCV-Bch RATIO measurement d.dddddEdd
dd.dddddEdd dd.ddddEdd
ddd.ddddEdd ddd.dddEdd
( ): The Talker format in the frequency measurement function depends on the measurement range.
The Talker format of TEMP is only for the 7461P.
7461A/61P 7451A

ADCMT 7451A Specifications

General

Brand	ADCMT
Model	7451A
Category	Multimeter
Language	English