MENU
1 MEAS
A.ZERO Auto-zero
OFF/ON/ONCE
IT SEC Integration time (sec)
10 sec to 10 sec (For 7461A/61P)
100 sec to 10 sec (For 7451A)
IT PLC Integration time (PLC)
0.02 PLC to 100 PLC
When the integration time is outside this range, it is set in seconds.
Although the setting range is the same in IT SEC, the value is con-
verted into the unit of PLC.
BchDC DC voltage measurement selection (DCV-Bch)
H-COM/HI-LO/RATIO
M.DISP Display mode
OFF/ON
DIGIT Number of display digits.
6 1/2 to 3 1/2 (For 7461A/61P)
5 1/2 to 3 1/2 (For 7451A)
Zin DCV input impedance selection
HiZ/10 M
.BEEP The threshold in the continuity measurement function
1 to 1000
(a)
Category layer
Selection layer Entry/Execution layer
To Next Page
Loading...
Need help?
General
