Need help?Do you have a question about the ADCMT 7352A and is the answer not in the manual?
General| Brand | ADCMT |
|---|---|
| Model | 7352A |
| Category | Multimeter |
| Language | English |
Describes the manual's structure and how to use it as a reference.
Summarizes the digital multimeter's features and capabilities.
Instructions for instrument malfunctions and contacting service.
Warns against opening case due to high voltage and temperature parts.
Explains the instrument's power fuse and its protective function.
Discusses instrument's potential interference and prevention methods.
Specific caution regarding the power-on procedure without connected DUTs.
Procedure for checking product and accessories upon delivery.
Specifies required environmental conditions for instrument installation.
Lists ambient temperature, humidity, and other conditions for operation.
Provides precautions to prevent damage from electrostatic discharge (ESD).
Lists and describes standard and optional accessories for the instrument.
Offers advice for connecting the instrument to other devices in a system.
Details the instrument's power needs and connection procedures.
Explains how to verify the rear panel power supply voltage setting.
Step-by-step instructions for adjusting the instrument's voltage setting.
Guides on correctly and safely connecting the instrument's power cable.
Introduces the instrument's front panel layout and components.
Details the display, keys, and input terminals on the front panel.
Explains instrument display indicators and areas.
Lists and explains keys for selecting measurement types.
Explains the function of MENU and ENTER keys for configuration.
Details connectors and features on the instrument's rear panel.
Guides through initial instrument operation after power-up.
Introduces the various measurement functions available.
Instructions for DC voltage measurements using Ach terminals.
How to measure AC voltage with AC and AC+DC coupling.
Performing resistance measurements (2-wire, low-power).
Performing DC current measurements using Ach terminals.
Measuring AC current with AC and AC+DC coupling.
How to measure frequency using Ach terminals.
How to set the measurement range using UP, DOWN, and AUTO keys.
Adjusting measurement speed and display digits using the RATE key.
Guides on utilizing the instrument's dual display capability.
Introduces the menu system for configuring instrument settings.
Explains the layered menu structure and navigation methods.
Provides a comprehensive list of menu options and functions.
Describes parameters for measurement functions via MENU.
Managing measurement ranges and using auto-range.
Explains auto-zero for eliminating offset errors.
Introduces sampling modes: single, dual sequential, dual synchronous.
Describes trigger system for events, delay, and multiple samples.
Lists and explains the nine available calculation functions.
How to save and load instrument settings.
Storing and recalling measurement results in memory.
Configuring system-level settings.
Disabling specific functions to prevent incorrect selection.
Disabling all front panel keys using a password.
Accessing and managing the instrument's error log.
Selecting and configuring interfaces (GPIB, USB) via MENU.
Covers the General Purpose Interface Bus (GPIB) for control.
Safety and operational precautions for GPIB use.
Details GPIB address, talk-only, command language, and continue settings.
Covers the RS-232 interface for serial communication.
Configuration settings for RS-232 (header, baud rate, parity, etc.).
Covers the Universal Serial Bus interface for connectivity.
Guides on connecting to PC and setting up USB ID.
Reference information for instrument commands.
Selecting between ADC, SCPI, and R6452 command languages.
Lists commands specific to the ADC command language.
Details commands conforming to the SCPI standard.
Explains the layered status register architecture for event reporting.
Provides example programs for remote control and automation.
Sample VB code using ADC's GPIB commands.
Sample VB code using SCPI commands for GPIB.
Sample VB code for RS-232 control.
Sample VB code for USB control.
Provides detailed technical specifications for the instrument.
Specifications for DC voltage measurements (Ach and Bch).
Specifies accuracy, resolution, and input impedance for Ach DCV.
Specifications for AC voltage measurements (Ach).
Specifies accuracy, resolution, and input impedance for Ach ACV.
Specifications for resistance measurements (Ach).
Specifications for DC current measurements (Ach and Bch).
Specifies accuracy, resolution, and input protection for Ach DCI.
Specifications for AC current measurements (Ach).
Specifies accuracy, resolution for Ach AC current.
Specifications for frequency measurements (Ach).
Details for temperature measurements using thermocouples.
Specifications for diode measurements (Ach).
Details for continuity measurements (Ach).
Lists functions and formulas for various calculations.
Details specs for USB, GPIB, RS-232 interfaces.
Lists general operating and environmental specs.
Lists standard and optional accessories.
How to check and replace power and protection fuses.
Procedure for replacing the main power fuse.
Replacing protection fuses for current input terminals.
Instructions and warnings for cleaning the instrument.
Explains the importance and procedure for instrument calibration.
Necessary conditions and setup for calibration.
Lists calibration standards for different measurement functions.
Specifies calibration points (zero, full-scale) across functions.
Step-by-step guide for performing the calibration process.
Lists parts with limited lifespan and their expected usage.
Advises on proper disposal and recycling of components.
Provides guidelines for storing the instrument when not in use.
Explains the procedure for safely transporting the instrument.
Important notes before requesting repair or calibration.
Common problems and solutions before contacting service.
Information needed when contacting the manufacturer for service.
Initializes parameters and restores factory settings.
How to perform self-tests for instrument diagnostics.
Details the items checked during the self-test.
Testing display segments and panel keys.
Lists error codes, descriptions, and solutions.
To Next Page
