ADCMT 7352A - 5.3 Measurement Range and Auto-Range

7352 Series Digital Multimeter Operation Manual
5.3 Measurement Range and Auto-Range
5-9
5.3 Measurement Range and Auto-Range
5.3.1 Measurement Function and Range Structure
Table 5-2 shows the range structure corresponding to the measurement function.
Table 5-2 Measurement Function and Range Structure
Ach
DCV-Ach
ACV-Ach
(AC+DC)-Ach
2W-Ach LP-2W-Ach DCI-Ach
ACI-Ach
ACI(AC+DC)-Ach
FREQ-Ach Continuity-Ach Diode-Ach
2000 nA
20 A
200 mV 200 mV 200  200  200 A 200 A200 mV
2000 mV 2000 mV 2000  2000  2000 A 2000 A 2000 mV 2000  2000 mV
20 V 20 V 20 k 20 k 20 mA 20 mA 20 V
200 V 200 V 200 k 200 k 200 mA 200 mA 200 V
1000 V 700 V 2000 k 2000 k 2000 mA 2000 mA 700 V
20 M 20 M
200 M
Bch
DCV-Bch DCI-Bch
ACI-Bch
ACI(AC+DC)-Bch
TEMP
200 mV
2000 mV Fixed
20 V
200 V
10 A 10 A
NOTE: The range settings for each function are saved.
For the frequency function, the range is not switched in the frequency range but switched in the input
voltage range.